How to maintain your lighting equipment: best practices

Whether you are a DJ, event organiser, or passionate amateur, your lighting effects are key elements of your performances. Regular maintenance guarantees their longevity, prevents breakdowns in the middle of an event, and ensures optimal lighting performance. Here are some simple steps to take care of your lighting effects.

1. Regular dusting: an essential step

Dust is the number one enemy of lighting equipment. It can clog ventilation grilles, reduce light intensity, and even cause overheating.

• Use a dry or slightly damp microfibre cloth.
• An air blower (such as a can of compressed air) can be used to reach hard-to-reach areas.
• Avoid using any liquid products directly on the projector.

Recommended frequency: after each use in a dusty environment, or every 3-4 uses.

2. Cleaning lenses and optical facades

Transparent lenses or domes (such as on lasers, Derby, Moonflower, etc.) must remain spotless so as not to alter the beams.

• Clean with a soft, lint-free cloth.
• Use a special lens cleaner (such as those used for glasses or cameras) if necessary.

Tip: avoid using paper towels, as they are too abrasive.

3. Checking cables and connectors

As with all electrical equipment, regularly check the power and DMX cables:

• No bare or crushed wires.
• No slack in the plugs.
• No loose connections.

If in doubt, replace the cable.

4. Storage: avoid humidity and shocks

• Store your lights in suitable bags or flight cases.
• Never leave your equipment outdoors or in a boot in direct sunlight or freezing conditions.
• Avoid damp places such as cellars or uninsulated attics.

Tip: add a small desiccant bag to flight cases to limit humidity.

5. Handle with care = equipment that lasts

• Always carry heavy equipment in pairs.
• Avoid hitting lenses or motors.
• Never force fasteners (such as moving heads).

Remember to disconnect cables properly, without pulling on them.

6. Test your equipment before each event

Before a performance, test all lighting equipment:

• Automatic or DMX mode: check that they are responding normally.
• Check the rotation, light intensity and colour.
• Listen for any suspicious noises (stuck motor, noisy fan, etc.).

This will help you avoid any unpleasant surprises on the day.

7. Know the limits of each product

Some projectors are designed for moderate use, others for intensive use. Consult the manual for:

• The maximum continuous usage time
• Cooling cycles
• Recommended temperature ranges

Tip: never use a lighting product without ventilation in an enclosed space without ventilation.

Bonus: the role of our customer service

Our PEAKSER support team is here to advise you:

• Which cleaner should you use for your lenses?
• Which flight case should you choose to protect your lighting equipment?
• Which DMX cable should you choose depending on the length of the room?

Please do not hesitate to contact us via our support page if you have any questions about maintenance.